79-82 Stock Hood
Heavy Duty Features:
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.
– Black lacquered fiberglass textured
inner finish.
– Sandable gray gellcoated exterior
finish.
– Coremat® reinforced skin aids in
reduction of print-thru.

79-82 Cowl Induction 2″ Hood
Heavy Duty Features:
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.
– Black lacquered fiberglass textured
inner finish.
– Full Open inner chamber provides 2″
of additional clearance.
– Coremat® reinforced skin.

79-82 Custom Turbo Hood
Heavy Duty Features:
– Styled after the original 80’s design.
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.
– Black lacquered fiberglass textured
inner finish.
– Full Open inner chamber provides 2″
of additional clearance.
– Coremat® reinforced skin.
 

83-86 Stock Hood
Heavy Duty Features:
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.
– Black lacquered fiberglass textured
inner finish.

– Sandable gray gellcoated exterior
finish.
– Coremat® reinforced skin aids in
reduction of print-thru.

83-86 Cowl Induction 2″ Hood
Heavy Duty Features:
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.

– Black lacquered fiberglass textured
inner finish.
– Full Open inner chamber provides 2″
of additional clearance.
– Coremat® reinforced skin.

83-86 Custom Turbo Hood
Heavy Duty Features:
– Styled after the original 80’s design.
– 90 edges on both sides help to
maintain fender contours.
– Full perimeter inner frames – utilizes
OEM hinge & latch.
– Black lacquered fiberglass textured
inner finish.
– Full Open inner chamber provides 2″
of additional clearance.
– Coremat® reinforced skin.

 87-93 Custom Turbo Hood
Heavy Duty Features:
– Styled after the original 80’s design.
– 90 edges on both sides help to maintain fender
contours.
– Full perimeter inner frames – utilizes OEM hinge
& latch.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin.

79-93 Door
Race Weight Features:
– Smooth interior panel.
– Will accept original handle, hinge & latching
mechanism.
– All holes come closed & must be opened for
installation.
– Available in Light Weight design only.
– Strictly intended for Racing application only!
– Fully gellcoated inner & outer surface.
– Plastic windows required  attached to inner
door frame

87-93 Stock Hood
Heavy Duty Features:
– 90 edges on both sides help to maintain fender
contours.
– Full perimeter inner frames – utilizes OEM hinge
& latch.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin aids in reduction of
print-thru.

87-93 4″ Dominator™ Hood
Heavy Duty Features:
– Cowl Induction style design. (3.5″ Clearance)
TECHHOOD™ design.
– 90 edges on both sides help to maintain fender
contours.
– Full inner frames – utilizes OEM hinge & latch.
– Fully lined – smooth gellcoated inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin reduces “print thru”.
– Scoop and Inner liner come closed.

 87-93 Mach-I Hood
Heavy Duty Features:
– Cowl Induction style design. (1″ Clearance)
TECHHOOD™ design.
– 90 edges on both sides help to maintain fender
contours.
– Full inner frames – utilizes OEM hinge & latch.
– Fully lined – smooth gellcoated inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin reduces “print thru”.
– Scoop and Inner liner come closed.

87-93 GT-500 Hood
Heavy Duty Features:
– GT-500 style design. (2″ Clearance)
TECHHOOD™ design.
– 90 edges on both sides help to maintain fender
contours.
– Full inner frames – utilizes OEM hinge & latch.
– Fully lined – smooth gellcoated inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin reduces “print thru”.
– Scoop and Inner liner come closed.

87-93 Custom Turbo Hood
Heavy Duty Features:
– Styled after the original 80’s design.
– 90 edges on both sides help to maintain fender
contours.
– Full perimeter inner frames – utilizes OEM hinge
& latch.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Coremat® reinforced skin

 87-93 6″ Dominator Cowl Hood w/Cowl pnl
Race Weight Features:
– Designed w/Dominator style scoop.
– Full perimeter bracing & rear baffle installed.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Reinforced skin.
– Dominator scoop provides +/- 6″ clearance at
rear & +/- 5″ clearance at stock carb location.
– 90° Edges require sanding for desired fit.
– One piece construction – Yes, it comes out of
the mold this way!

87-93 6.5″ Aero Hood
Race Weight Features:
– Designed w/Pro-Stock style scoop for
maximum ram air flow.
– Full perimeter bracing & rear baffle installed.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Reinforced skin.
– Scoop comes closed. (Size 33″x6.5″x18″)
– Edges require sanding for desired fit.
– One piece construction – Yes, it comes out of
the mold this way!

87-93 7.5″ Torpedo Hood w/Cowl pnl
Race Weight Features:
– Designed w/Pro-Stock style scoop for
maximum ram air flow.
– Full perimeter bracing & rear baffle installed.
– Black lacquered fiberglass textured inner.
– Sandable gray gellcoated exterior finish.
– Reinforced skin.
– Scoop comes closed. (Size 48″x7.5″x18″)
– Edges require sanding for desired fit.
– One piece construction – Yes, it comes out of
the mold this way!

79-93 Trunk Air Foil
  – One Piece Construction
– Designed for fastbacks only.
– Smooth grey gellcoat finish.
– Designed for fastbacks only.
– Smooth gray gellcoat finish

 79-93 Trunk Lid
   Race Weight Features:
– Black lacquered fiberglass
textured inner.
– Sandable gray gellcoated
exterior finish.
– Reinforced skin.

79-93 Hatch
   Race Weight Features:
– Black lacquered fiberglass
textured inner.
– Sandable gray gellcoated
exterior finish.
– Reinforced skin.

.

79-93 ’93 GT Front End                           
 Features:
– Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
– Smooth 90° roll into wheel well openings, generally extends in a full  ¾”.
– The interior finish is Fiberglass texture – coated in black lacquer – it comes without wheel wells.
– Light Weight Version – is intended for racing applications and does not come with a hinge kit.
– These unit generally only weigh in at approx 30#  +/- .

 IMPORTANT – Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for “Street Racing” have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 – 15# more than a Drag Racing unit.  Units manufactured for “Sand Drag” or “Baja” style racing are built so as to be midway between the Street Drag and the Street Race units.